Tev, Kellerman, vajadzētu būt PN dzinējam ar Pieburg 2ee karburatoru, ar lambda zondi un ogles filtru.
Aizbrauc Rīgā, Tallinas ielā 62, pa lielajiem brūnajiem restotajiem vārtiem iekšā, cauri vārtrūmei un taisni līdz pašam galam. Boksā strādā vecs kungs, kas saregulēs dajebko no viņa ēras. Ja nesanāk atrast, tad iebrauc iekšā un uzprasi kādam ko satiec.
Google maps koordinātas: 56.957896,24.143641
Kā jau minēju, iebraukšana cauri Tallinas 62 vārtrūmi.
Nedaudz info ko atradu:
* In vehicles with activated charcoal filter system, Ecotronic control unit -J184- is equipped with a fault memory. Before starting repairs, adjustments and fault finding, the fault memory must be read and, if necessary, final control diagnosis carried out
* Adjuster screws are secured with caps, bungs or locking paint so that adjustment is not possible without destroying the locking mechanism. Renew locking mechanism after repairing or adjusting.
* Grease all carburettor joints with MoS2 grease.
* Idle speed is regulated by Ecotronic control unit -J184- and cannot be adjusted.
* The CO basic setting is checked via flash pulses with the voltage tester -V.A.G 1527B- on a test connector in the engine compartment; the Lambda probe -G39- must remain connected.
* On adjusting the CO basic setting, the Lambda probe -G39- must be switched off by disconnecting the Lambda probe cable.
http://volkswagen.workshop-manuals.com/ ... php?id=224
Visi linki kreisajā pusē ir attiecībā uz diagnostiku un remontu.